Hanging bin, with exclusive closed front. Allows 100% case capture. Quantity 6. Heavy duty polypropylene. 4" wide x 6" long x 3" tall Fits common bin brackets and has exclusive closed front to prevent case spillage. Mfg: Lee Precision
Read more
from Brownells
(IN Stock)
USP LEVER, CONTROL, RIGHT, USPCOMPACT, Mfg: Heckler & Koch
Read more
from Brownells
(IN Stock)
Chisel cut teeth works great for fast metal removal, or use as rasps to slightly enlarge or adjust holes in stocks. #2 is perfect for adjusting screw and pin holes, scope mount holes, and fine cuts on tightly curved parts. Use 3/16" diameter #2 cut to...
Read more
from Brownells
(IN Stock)
We supply our taps in Carbon steel whenever possible. If one should break off in a hole, the remains can be "shattered" with a punch for easy removal. All numbers in chart are shown as Nominal Size, Tap Drill Size, Clearance Drill Size. Mfg: Reiff &...
Read more
from Brownells
(IN Stock)
Choice between flat and curved surfaces. Taper slightly in both width and thickness. Bastard works for wood and metal. Mfg: Apex Tool Group SPECS: Double-cut flat side, single-cut curved side. 8X"X (20.3cm) long, �" (19mm) wide, 7⁄32" (5.6mm) thick.
Read more
from Brownells
(IN Stock)
High quality hex jam nuts for indexing muzzle devices. Available in black or stainless steel for �-28 threads. Mfg: J P Enterprises SPECS: .200 thick. Requires use of thin wrench to tighten against brakes and comps.
Read more
from Brownells
(IN Stock)
Because they can be "off" as much as 25�, ball-end, hex wrenches will work in places conventional ones won't. Use "square" end when more leverage is needed. Supplied in deluxe case with a locking slot for each wrench. NOTE: Standard Action calibers...
Read more
from Brownells
(IN Stock)
With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with...
Read more
from Brownells
(IN Stock)
With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with...
Read more
from Brownells
(IN Stock)
With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with...
Read more
from Brownells
(IN Stock)
Parallel ground tips to better fit the bottom of the slot, where the screw is strongest, for greater torque transfer. Fit a wide selection of factory screws. #6 X-L has a 12" long shank for buttstock screws/bolts. Because of the end use of this...
Read more
from Brownells
(IN Stock)
Ideal for illuminating hard-to-see areas of the chamber, receiver and barrel interior. A bright white LED puts out 15, 000 mcd brightness housed in a 5 flex neck that is attached to a machined brass housing.
Read more
Switch to grid view