Mayhew Tools Line-Up Punch - Full Finish, 18 in, 1/2 in Tip, Alloy Steel (479-22024)
Read more
from ReStockIt
(IN Stock)
Band-It CP Series Center Punch Clamp, 1 in dia, 5/8 in Wide, 0.025 in Thick, Galvanized Carbon Steel (080-CP0499)
Read more
from ReStockIt
(OUT Stock)
Band-It CP Series Center Punch Clamp, 0.8125 in dia, 3/8 in Wide, 0.025 in Thick, Galvanized Carbon Steel (080-CP0399)
Read more
from ReStockIt
(OUT Stock)
Specially selected tool steel is hardened and tempered to the proper hardnessKnurled finger grips for ease of handlingA special tempering process makes the head less likely to fracture from a hard, off-center blow Tip Size = 3/32 in Pin Handle...
Read more
from ReStockIt
(IN Stock)
Extra-longWell proportioned, hardened, properly tempered, and have a knurled gripFor following long cotter pins and the like into holes with out hindrance Tip Size = 1/4 in Body Size = 4 1/2 in Pin Handle Overall Length = 8 in Body Shape = Round...
Read more
from ReStockIt
(OUT Stock)
Tension of regulating spring is constant, so marks made by point are uniform in depth and size for each settingEasily removable pointNo hammer required, mechanism automatically strikes a blow when downward pressure is appliedAdjustable knurled cap...
Read more
from ReStockIt
(OUT Stock)
Extra-longWell proportioned, hardened, properly tempered, and have a knurled gripFor following long cotter pins and the like into holes with out hindrance Tip Size = 1/8 in Body Size = 4 1/2 in Pin Handle Overall Length = 8 in Body Shape = Round...
Read more
from ReStockIt
(IN Stock)
General Tools Steel Automatic Center Punch Replacement Points, For #79 Mini HD Center Punch (318-79P)
Read more
from ReStockIt
(OUT Stock)
Mayhew Tools Line-Up Punch - Full Finish, 16 in, 5/16 in Tip, Alloy Steel (479-22008)
Read more
from ReStockIt
(OUT Stock)
Extra-longWell proportioned, hardened, properly tempered, and have a knurled gripFor following long cotter pins and the like into holes with out hindrance Tip Size = 5/16 in Body Size = 4 1/2 in Pin Handle Overall Length = 8 in Body Shape = Round...
Read more
from ReStockIt
(OUT Stock)
Inside taper permits the punchings to clear easily through the barrelPunches have fully polished barrel and black enamel handleAdditional sizes available upon request Cutter Diameter = 5/8 in Body Tip Handle Blade Material = Carbon Steel Type = Arch...
Read more
from ReStockIt
(OUT Stock)
Modified parabolic struck end for greater resistance to mushrooming and chippingFor metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points Stock Shape = Hex Pin Handle Overall Length = 4 5/8 in Body...
Read more
from ReStockIt
(OUT Stock)
Switch to grid view