In keeping with the superb quality of the screwdrivers, we designed two magnificent Solid Oak Bench Blocks to hold your Fixed-Blade Gunsmith's Screwdrivers. They are real beauties. Each one has 3 tiers to make them compact, you can see both the...
Read more
from Brownells
(IN Stock)
In keeping with the superb quality of the screwdrivers, we designed two magnificent Solid Oak Bench Blocks to hold your Fixed-Blade Gunsmith's Screwdrivers. They are real beauties. Each one has 3 tiers to make them compact, you can see both the...
Read more
from Brownells
(IN Stock)
Self-piloted Reamer cuts the spring guide tunnel to the proper depth and diameter. Mfg: Egw SPECS: Tool Steel (TS) or Carbide (Carb.) blades. 8" (20cm) long, 7/16" (11.1mm) dia. shank.
Read more
from Brownells
(IN Stock)
Spiral Stitched - used primarily for first cleaning operation on the gun with No. 140 Polish-O-Ray(TM) to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of Soft Felt wheels - being of a...
Read more
from Brownells
(IN Stock)
Spiral Stitched - used primarily for first cleaning operation on the gun with No. 140 Polish-O-Ray(TM) to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of Soft Felt wheels - being of a...
Read more
from Brownells
(IN Stock)
7 plys of prime woven jute with an outer muslin cover on each side provide a very aggressive surface for fast removal of rough metal, rust and similar jobs with coarser polishing grits. Finer grits produce an attractive "brushed" finish. Spiral...
Read more
from Brownells
(IN Stock)
#81 Handle - Rugged, and hand filling with a powerful magnet for fast bit changes. Plus, the magnetism transfers through the bit, to hold the screw against the bit. The handle is made from a tough, nearly unbreakable plastic, while the steel, hex shank...
Read more
from Brownells
(IN Stock)
Short shank, compact, clip-tip handle MAGNA-TIP with three custom bits for S&W Strain, Windage, Side Plate and Sight attaching screws. Gives excellent control. Mfg: Brownells SPECS: 5-1/2" (14.0cm) overall. 3-3/4" (9.5cm) x 1" (2.5cm) diameter.
Read more
from Brownells
(IN Stock)
THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, ...
Read more
from Brownells
(IN Stock)
THE PERFECT TIP & BLADE We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, ...
Read more
from Brownells
(IN Stock)
Brownells exclusive "just right" handle gives superb control. Hex section at base of shank lets you attach a wrench for increased leverage and more turning power. Unique, anti-cam blade teeth provide extra "bite" on hard-to-remove Phillips screws but...
Read more
from Brownells
(IN Stock)
One-piece shaft and driver provide increased control for precision, scope mounting applications where a slip of the wrist can be a very expensive mistake. With the increased use of Allenhead screws in firearms applications, these high-quality drivers...
Read more
from Brownells
(IN Stock)
Switch to grid view